2.4G RF Wireless RGB LED Controller

Technical Parameters of 2.4G RF Wireless RGB LED Controller

1. Working voltage: DC 12V/24V
2. Output control: 3 circuits(R/G/B) 
3. Control current: 6A/circuit 
4. Connecting mathod: common anode
5. Dimension: L66*W64*H24
6. Receiving range: 20m

Functions of 2.4G RF Wireless RGB LED Controller keys

1. Key 1: on/off 
2. Key 2: light changing mode(15 modes) 
3. Key 3: color light/white light switching mode 
4. Key 4: turn up(brightness/speed)
5. Key 5: turn down(brightness/speed

How to use
1. Press Key 1 to turn on/off in any state 
2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total 
3. Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring
4. Resume fuction. The previous settings will be resumed while power on again
5. Matching code
       Press Key 4 once within 3 seconds when power on again,the light will blink 3 times if matching is successful.
    Clearing Code
       Press Key 4 five times within 3 seconds when power on again,the light will blink 6 times if clearing is successful.

Caution
Please don’t touch or press the color ring while loading the battaries to protect the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.